Gas-Sensing Activity of Amorphous Copper Oxide Porous Nanosheets

In this paper, the gas-sensing properties of copper oxide porous nanosheets in amorphous and highly crystalline states were comparatively investigated on the premise of almost the same specific surface area, morphology and size. Unexpectedly, the results show that amorphous copper oxide porous nanosheets have much better gas sensing properties than highly crystalline copper oxide to a serious of volatile organic compounds, and the lowest detection limit (LOD) of the amorphous copper oxide porous nanosheets to methanal is even up to 10 ppb. By contrast, the LOD of the highly crystalline copper oxide porous nanosheets to methanal is 95 ppb. Experiments prove that the oxygen vacancies contained in the amorphous copper oxide porous nanosheets play a key role in improving gas sensitivity, which greatly improve the chemical activity of the materials, especially for the adsorption of molecules containing oxygen-groups such as methanal and oxygen.     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明，对于[ScO(CO₂)_n]⁺体系，在n≤4时，形成了溶剂化结构；在n=5时，形成了碳酸盐结构，实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系，需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中，只发现了溶剂化结构，没有观察到碳酸盐结构. 理论计算表明，[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒，[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

阴离子-π复合物(I-·C6F6)的成键分析

最近Anst?ter, et al. 发表了对阴离子-π复合物(I^-·C₆F₆)的第一个定量谱学测量[J. Am. Chem. Soc. 141, 6132 (2019)]，认为成键作用中相关作用占41%，静电作用占23%，得出相关作用占主导的结论. 本研究表明，该文献的“静电作用”中混入了Pauli排斥作用，后者在数值上抵消了前者的作用. 在复合物I^-·C₆F₆中，发现静电作用是相关作用的两倍多，因而阴离子-π复合物中仍应是静电作用占主导.     

Collective sustained oscillations in excitable small-world networks: the moderate fundamental loop or the minimum Winfree loop?

Nonlinear Dynamics - The problem of self-sustained oscillations in excitable complex networks is the central issue under investigation, among which the exploration of the key factors in determining...     

面向装配节点平衡的产品生产物流协调优化研究

在由多个并行零件生产线和装配线组成的产品生产物流中, 各生产线的瓶颈工序制约了装配节点及其整个生产物流的平衡. 为此, 基于约束理论和JIT(Just In Time)思想, 提出主、次瓶颈的概念及其判别方法和主瓶颈拉动次瓶颈、瓶颈前后拉动生产与平行顺序移动生产相结合的生产策略, 研究了基于负荷率的瓶颈工序负荷控制方法和主瓶颈触发次瓶颈拉式生产的时间控制方法, 使瓶颈工序利用率最大化, 各个零件到达装配节点的同步性得到改善. 算例的SIMIO仿真结果表明, 装配节点的在制品存量大幅度减少, 利用率提高.     

ZnS Nanospheres for Optical Modulator in an Erbium-Doped Fiber Laser

Zinc sulfide (ZnS), which belongs to transition metal monochalcogenides, is a semiconductor material with wide direct band gap. It can potentially show some special applications (such as luminescence, phosphor, sensors, infrared window materials, photocatalysis) by changing the morphology, size, and crystal structure of semiconductor materials. However, ZnS nanospheres have not been studied as optical modulators until now. Herein, ZnS nanospheres are synthesized by the hydrothermal method and are used to realize optical modulators in an Er-doped fiber laser. The evanescent field effect is utilized to incorporate the ZnS nanospheres on a tapered fiber. Furthermore, with the increase in pump power, the modulation interval gradually decreases to a minimum of 34.36 ns corresponding to the modulation frequency of 29.1 MHz, which is the highest modulation frequency to our knowledge in a ring cavity all-fiber laser. These results demonstrate ZnS nanospheres together with the interaction of dispersion and nonlinearity in optical fibers can modulate the proposed lasers. This not only provides a new method for controlling the power and frequency of all optical modulators, but also marks an important step for ZnS materials in optics research and device applications.     

Fault Tolerant Multi-Party Authenticated Quantum Conference Against Collective Noise

International Journal of Theoretical Physics - With the advent of new science and technology, teleconference, which allows multiple participants to communicate directly without being constrained by...     

群集建筑中大跨裙摆屋盖风荷载特性的数值模拟研究

以苏州太平金融大厦为工程背景,针对其大跨裙摆屋盖的风荷载作用,首先采用RNG k-ε模型模拟分析了其平均风压分布规律,以及风向变化对屋盖表面风荷载体型系数的影响;其次,引入干扰因子IF,探讨了周边建筑对大跨裙摆屋盖风荷载的气动干扰作用。结果表明:0°风向下,走廊上方屋盖两侧区域出现“上吸下顶”的叠加作用;90°风向下屋盖北侧飘带末端区域受到狭道风效应出现正压集中现象;风向变化对大跨裙摆屋盖的风荷载体型系数分布影响较大;且周围建筑物对大跨裙摆屋盖的气动干扰效应明显,主要表现为风压“遮挡效应”,而局部区域表现为风压“放大效应”。     

High effects of smoke suppression and char formation of Ni?Mo/Mg(OH)2 for polypropylene

The Ni? Mo/Mg(OH)₂ (NMM) hybrid as an efficient flame retardancy and smoke suppression composite for polypropylene (PP) was synthesized through Ni? Mo co‐precipitation on the surface of Mg(OH)₂ (MH) hexagonal nanosheets. Compared to PP/MH, PP/NMM exhibited excellent smoke suppressing and flame retardancy on the heat release rate, total heat release, smoke production rate, total smoke production, CO production rate and total CO production with the same loading. The reduced hazard of PP/NMM was mainly attributed to the high physical barrier effect of compact char residues on heat, smoke and combustible gas. The mechanism study indicated that multiwalled carbon nanotubes (MWCNTs) generated from the catalytic carbonization of PP by the Ni? Mo compound could play the role of “rebar” to strengthen the char residues, avoid the generation of cracks and form highly compact char layer. Furthermore, MgO could facilitate the production of MWCNTs through changing the pyrolysis process of PP and increasing the reaction time between pyrolysis gas and Ni? Mo compound. Hence, the new Ni? Mo/MH catalyst hybrid may explore the potential for solving the tough problem of the flammability and heavy smoke of the polyolefins system.